Colt Automatic Pistol and Revolver Information - 25 years of Service to Colt Firearms Collectors

COLT MODELS

 

 

Colt Model 1903 Pocket Hammer .38 ACP - Disassembly Instructions

Pistols with Concave Plug
Below the Muzzle
1900plug2.jpg (9806 bytes)

Always make sure pistol is unloaded!

1. Remove magazine

2. Depress spring loaded concave plug 1/8". Depressing the plug releases tension on the slide lock

3. With the left side of the pistol facing down, depress plug completely while pushing on right side of slide lock. The slide lock should drop out. Cock hammer and withdraw slide from the rear. No force is required to remove the slide lock. The slide lock will only exit the pistol from the left side.

4. Assemble in reverse order remembering to line up the small pin on the slide lock with the corresponding cut in the slide. Slide lock must be inserted from the left side while concave plug is fully depressed.

NOTE: Further disassembly of the Model 1903 Pocket Hammer requires the removal of pins and is not recommended.

Gun of the Month


January 2022


Contact Us


 



Home | Wants | Gun of the Month | Historical Info | Instruction Sheets
Site Search| Online Bookstore | Colt Care | Links

Questions / Comments? Contact Us!
 

The Rampant Horse and Colt logos are registered
trademarks of Colt's Manufacturing Company, Inc. Hartford, CT

Copyright © 1996 - 2024 by Coltautos.com. All rights reserved.
Please read our online Privacy Statement
The Coltautos.com logos and all proprietary artwork and photos are the property of Coltautos.com and may not be reproduced or distributed without expressed written permission.