|Pistols with Concave Plug
Below the Muzzle
Always make sure pistol is unloaded!
1. Remove magazine
2. Depress spring loaded concave plug 1/8". Depressing
the plug releases tension on the slide lock
3. With the left side of the pistol facing down, depress
plug completely while pushing on right side of slide lock.
The slide lock should drop out. Cock hammer and withdraw
slide from the rear. No force is required to remove the
slide lock. The slide lock will only exit the pistol from
the left side.
4. Assemble in reverse order remembering to line up the
small pin on the slide lock with the corresponding cut in
the slide. Slide lock must be inserted from the left side
while concave plug is fully depressed.
NOTE: Further disassembly of the Model
1905 Military requires the removal of pins and is not